メッセージを送る
Zhenglan Cable Technology Co., Ltd
製品
製品
家へ > 製品 > アルミニウム送電線 > 100mm2 144mm2 1000mm2 ACSRのアルミニウム コンダクターの鋼鉄は補強した

100mm2 144mm2 1000mm2 ACSRのアルミニウム コンダクターの鋼鉄は補強した

Product Details

起源の場所: 河南、中国

ブランド名: Zhenglan Cable

証明: 3C; ISO 9001:2015, ISO 14001:2005, OHSAS 18001:2007

モデル番号: わずかな区域:144mm2頭上式の裸のコンダクター ワイヤー

Payment & Shipping Terms

最小注文数量: 300メートル

パッケージの詳細: 顧客の要求として木のドラム、木およびスチール ドラム、

受渡し時間: 15日

支払条件: L/C、T/T、ウェスタン・ユニオン

最高 の 価格 を 入手 する
ハイライト:

1000mm2 ACSRのアルミニウム コンダクターの鋼鉄は補強した

,

144mm2 ACSRのアルミニウム コンダクターの鋼鉄は補強した

,

144mm2 acsrの中心ワイヤー

材料:
アルミニウムおよび鋼鉄
中心:
正常かカスタマイズされる
ケーブル ドラムの長さ:
ドラムごとの400~1000meter
characted:
裸のコンダクター
わずかな区域:
18.4~1439
ドラム:
木または鉄
材料:
アルミニウムおよび鋼鉄
中心:
正常かカスタマイズされる
ケーブル ドラムの長さ:
ドラムごとの400~1000meter
characted:
裸のコンダクター
わずかな区域:
18.4~1439
ドラム:
木または鉄
100mm2 144mm2 1000mm2 ACSRのアルミニウム コンダクターの鋼鉄は補強した

100mm² 144mm² 1000mm² ACSR Aluminum Conductor Steel Reinforced

 

APPLICATION: ACSR is mainly used as bare overhead transmission cable and as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical teatures exist.

 

 

STANDARD

Basic design to BS 3242 / BS EN 50182 / IEC 61089 / ASTM B 399/B 399M / DIN 48201 -6 standards.

 

CONSTRUCTION ACSR cable bvconsists of aluminum wires. The aluminum wires are concentrically stranded.

This section deals with heat-treatable magnesium silicon type aluminium alloys to the applicable International Standard, the electrical and mechanical properties of which all fall within the values suggested by relevant standard. Conductors to all other recognized specifications can also be supplied. The alloys referred to have higher strength but lower conductivity than pure aluminium. Being lighter, alloy conductors can sometimes be used to advantage in place of the more conventional ACSR; Having lower breaking loads than the later, their use becomes particularly favourable when ice and wind loadings are low.

 

(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.

 

ELECTRICAL PROPERTIES

density@20ºC 2.70 kg/dm
Temperature Coefficient@20°C 0.00360 (°C)
resistivity@20°C 0.0326 Ohms mm2/m
linear Expansivity

23 x10-6 (°C)

 

SERVICE CONDITIONS

Ambient Temperature -5°C - 50°C
Wind Pressure 80 – 130kg/m
Seismic Acceleration 0.12 - 0.05g
Isokeraunic level 10 – 18
relative Humidity 5 – 100%


100mm2 144mm2 1000mm2 ACSRのアルミニウム コンダクターの鋼鉄は補強した 0

 

CONSTRUCTION PARAMETERS

• IEC 60189

Code Nominal Area Stranding Overall Diameter Weight Rated Strength Electrical Resistance Current Rating*
  mm2 No.x mm mm Kg/Km KN Ω/Km A
16 18.4 7/1.83 5.49 50.4 5.43 1.7896 86
25 28.8 7/2.29 6.87 78.7 8.49 1.1453 113
40 46 7/2.89 8.67 125.9 13.58 0.7158 151
63 72.5 7/3.63 10.89 198.3 21.39 0.4545 200
100 115 19/2.78 13.9 316.3 33.95 0.2877 266
125 144 19/3.10 15.5 395.4 42.44 0.2302 305
160 184 19/3.51 17.55 506.1 54.32 0.1798 355
200 230 19/3.93 19.65 632.7 67.91 0.1439 407
250 288 19/4.39 21.95 790.8 84.88 0.1151 466
315 363 37/3.53 24.71 998.9 106.95 0.0916 535
400 460 37/3.98 27.86 1268.4 135.81 0.0721 618
450 518 37/4.22 29.54 1426.9 152.79 0.0641 663
500 575 37/4.45 31.15 1585.5 169.76 0.0577 706
560 645 61/3.67 33.03 1778.4 190.14 0.0516 755
630 725 61/3.89 35.01 2000.7 213.9 0.0458 809
710 817 61/4.13 37.17 2254.8 241.07 0.0407 866
800 921 61/4.38 39.42 2540.6 271.62 0.0361 928

     
             


     Why you choose us?

  • OEM/ODM services provided;
  • Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards; Customer standard requirments Accepted;
  • Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
  • Registered capital of $30 million and factory covers an area of 60,000㎡;
  • Advanced test equipment and procedures, 100% inspection before factory;
  • Enough stocks and the higest efficient shipping time guarranteed;
  • Professional pre-sales and after-sales services provided.
Similar Products